The latest F5 201 exam preparation materials and online practice
These are the latest F5 201 exam questions in 2025, which can help you understand the entry-level exam of the F5 201 (TMOS Administration) certification system.
For network administrators, it is not only a certificate that proves their ability, but also an opportunity to improve their skills. However, the exam covers many topics and has many details, so it is easy to get lost when preparing for the exam. By practicing the complete 254 F5 201 exam questions: https://www.leads4pass.com/201.html, you can avoid detours and pass the exam in one go.
F5 201 Exam Trends
The F5 201 exam consists of 70 multiple-choice questions and takes 90 minutes to complete. The passing score is about 70%. Based on the latest exam preparation materials, the exam still focuses on BIG-IP Local Traffic Management (LTM), but some new trends have also been added. For example, several questions involve traffic optimization in a cloud environment, which shows that F5 is adapting to industry changes and testing whether candidates can adapt to a hybrid cloud architecture.
Candidates are welcome to practice the test using the latest F5 201 exam preparation materials to master the key learning directions and be fully prepared. Below is a free copy of the latest F5 201 exam questions.
Practice the latest F5 201 exam questions online
Question 1:
A pool of four servers has been partially upgraded to include two new servers with more memory and CPU capacity. The BIG-IP Administrator must change the load balance method to consider more connections for the two new servers. Which load balancing method considers the pool member’s CPU and memory load?
A. Round Robin
B. Dynamic Ratio
C. Ratio
D. Least Connection
Correct Answer: C
Question 2:
The BIG-IP Administrator is unable to access the management console via Self-IP 10.10.1.33 and port 443. What is the reason for this problem?
A. Packet Filter needs to be configured to allow a source
B. Self IP is configured to allow TCP All
C. Self IP is configured to allow UDP 443
D. Packet Filter is configured to allow port 443
Correct Answer: C
Question 3:
Which three statements describe a characteristic of profiles? (Choose three.)
A. Default profiles cannot be created or deleted.
B. Custom profiles are always based on a parent profile.
C. A profile can be a child of one profile and a parent of another.
D. All changes to parent profiles are propagated to their child profiles.
E. While most virtual servers have at least one profile associated with them, it is not required.
Correct Answer: ABC
Question 4:
What is the purpose of provisioning?
A. Provisioning allows modules that are not licensed to be fully tested.
B. Provisioning allows modules that are licensed to be granted appropriate resource levels.
C. Provisioning allows the administrator to activate modules in nonstandard combinations.
D. Provisioning allows the administrator to see what modules are licensed, but no user action is ever required.
Correct Answer: B
Question 5:
Refer to the exhibit.
How many nodes are represented on the network map shown?
A. Four
B. Three
C. One
D. Two
Correct Answer: B
Question 6:
A BIG-IP Administrator is unable to connect to the management interface via HTTPS. What is a possible reason for this issue?
A. The port lockdown setting is configured to Allow None.
B. An incorrect management route is specified.
C. The IP address of the device used to access the management interface is NOT included in the “P Allow” list in the Configuration Utility.
D. The IP address of the device used to access the management interface is NOT included in the “httpd Allow” list in the CLI.
Correct Answer: D
Question 7:
An 816-IP Administrator recently deployed an application. Users are experiencing slow performance with the application on some remote networks. Which two modifications can the BIG-IP Administrator make to address this issue? (Choose two)
A. Apply the dest addr profile to the Virtual Server
B. Apply the f5-tcp-wan profile to the Virtual Server
C. Apply f5-tcp-lan profile to the Virtual Server
D. Apply source_addr profile to the Virtual Server
E. Apply fasti_4 profile to the Virtual Server
Correct Answer: BC
Question 8:
A BIG-IP Administrator is configuring a pool with members who have differing capabilities.
Connections to pool members must be load-balanced appropriately.
Which load balancing method should the BIG-IP Administrator use?
A. Least Sessions
B. Least Connections (member)
C. Fastest (node)
D. Weighted Least Connections (member)
Correct Answer: D
Question 9:
Assume the bigd daemon fails on the active system. Which three are possible results? (Choose three.)
A. The active system will restart the bigd daemon and continue in active mode.
B. The active system will restart the tmm daemon and continue in active mode.
C. The active system will reboot, and the standby system will go into active mode.
D. The active system will fail over, and the standby system will go into active mode.
E. The active system will continue in active mode but gather member and node state information from the standby system.
Correct Answer: ACD
Question 10:
An 8IG-IP Administrator configures a Virtual Server to load balance traffic between 50 web servers for an e-commerce website. The traffic is being load balanced using the Least Connections (node) method. The web server administrators report that customers are losing the contents from their shopping carts and are unable to complete their orders.
What should the BIG-IP Administrator do to resolve the issue?
A. Change the Default Persistence Profile setting to cookie
B. Change Load Balancing method to Ratio (member)
C. Change the Default Persistence Profile setting to sipjnfo
D. Change Load Balancing method to Ratio (node)
Correct Answer: A
Question 11:
Refer to the exhibit.
A BIG-IP Administrator needs to fall over the active device. The administrator logs into the Configuration Unity and navigates to Device Management > Traffic Group. However, Force to Standby is greyed out. What is causing this issue?
A. The BIG-IP Administrator is NOT logged into the command line to tail over
B. The BIG-IP Administrator is on the Standby Device
C. The BIG-IP Administrator is logged in as root
D. The BIG-IP Administrator is logged in as administrator
Correct Answer: B
Question 12:
A BIG-IP Administrator suspects that one of the BIG-IP device power supplies is experiencing power outages.
Which log file should the BIG-IP Administrator check to verify the suspicion?
A. /war /log/daemon.log
B. /var/log/kern.log
C. /var/log/ltm
D. /var/log/audit
Correct Answer: C
Question 13:
A site wishes to perform source address translation on packets from some clients but not others. The determination is not based on the client\’s IP address, but on the virtual servers their packets arrive. What could best accomplish this goal?
A. An SNAT for all addresses could be defined, and then the SNAT processing for select VLANs.
B. Some virtual servers could be associated with SNAT pools and others not associated with SNAT pools.
C. The decision to perform source address translation is always based on the VLAN. Thus, the goal cannot be achieved.
D. The decision to perform source address translation is always based on a client\’s address (or network). Thus, this goal cannot be achieved.
Correct Answer: B
Question 14:
The BIG-IP appliance fails to boot. The BIG-IP Administrator needs to run the End User Diagnostics (EUD) utility to collect data to send to F5 Support.
Where can the BIG-IP Administrator access this utility?
A. Console Port
B. Internal VLAN interface
C. External VLAN interface
D. Management Port
Correct Answer: A
Question 15:
Given that VLAN failsafe is enabled on the external VLAN and the network that the active BIG-IP\’s external VLAN is connected to has failed, which statement is always true about the results?
A. The active system will note the failure in the HA table.
B. The active system will reboot, and the standby system will go into active mode.
C. The active system will failover, and the standby system will go into active mode.
D. The active system will restart the traffic management module to eliminate the possibility that BIG-IP is the cause of the network failure.
Correct Answer: A
…
How to Pass First Time Using Exam Prep Materials
F5 201 exam preparation materials help you point the way. You should learn to plan the review focus: read the theory and official documents in the first two weeks, and practice questions and practice in the last two weeks. Practice is really important. For example, configuring a virtual server is much better than just reading a book. In addition, use the exam preparation materials to simulate the exam to help you check your shortcomings and make adequate preparations.
Final
Practice the latest F5 201 exam preparation materials: https://www.leads4pass.com/201.html. Grasp the latest and most comprehensive key points of 2025, and you will have a good idea. F5 201 is not only an exam, but also a springboard for your career. Don’t hesitate, pick up the preparation materials and start reviewing, it is completely feasible to pass it in one go